Analog Input Below Minimum

Was bedeutet 8110 ?

An analog input signal (e.g., 0-10V, 4-20mA) has fallen below its configured minimum limit, which must be set to 0.5V (1 mA) or above in parameter group 13. Depending on parameter 30.01 (AI<MIN FUNCTION), the drive may trip, set a constant speed (12.16), or freeze at the last operating speed.

• Analog input signal (e.g., AI1, AI2) is below its configured minimum threshold (P7-01, P7-02).
• Sensor failure providing a reading outside expected operational range.
• Incorrect calibration of the analog input signal.
• Wiring issue or short circuit on the analog input line.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Verify parameter 30.01 (AI<MIN FUNCTION) is set correctly for the desired drive reaction upon signal loss.

2. 2

   Measure the analog input signal at its respective terminals (e.g., AI1, AI2) to confirm it is above the set minimum limit.

3. 3

   Review parameter settings in group 13 (ANALOGUE INPUTS) to confirm the minimum limit is configured correctly, typically 0.5V (1mA) or above.