GROUPERR_RANGE_NOMOTIONFILTERTIME

Was bedeutet 42E9 ?

The 'No Motion Filter Time' parameter configured for the group is outside its allowed range of [0.0 ... 60.0] seconds. This parameter filters brief periods of non-motion to prevent false 'no motion' detections, and an invalid setting can cause incorrect status reporting or premature task completion.

• Manual configuration error where the 'No Motion Filter Time' parameter for the group was set below 0.0 seconds or above 60.0 seconds.
• Automated configuration script or PLC logic attempted to write an out-of-range value to the 'No Motion Filter Time' parameter.
• Corrupted data in the persistent configuration memory of the controller, leading to an invalid 'No Motion Filter Time' value being loaded.
• Software bug in the HMI or engineering tool that allowed an invalid value to be entered without proper range validation for the parameter.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   1. Access the NC group configuration via the engineering software (e.g., TwinCAT XAE).

2. 2

   2. Locate the 'No Motion Filter Time' parameter for the affected NC group.

3. 3

   3. Modify the 'No Motion Filter Time' parameter to a value within the allowed range of [0.0 ... 60.0] seconds.

4. 4

   4. Save the updated configuration to the controller and activate it.

5. 5

   5. Perform an NC reset or cycle power on the controller to apply the new parameter value.