Press Not Moving After Start Command

Was bedeutet 0x401F ?

The PressStarted input was TRUE, commanding the press to move, but the position did not change (or 'Stopped' did not become FALSE) within the PressStartedDelayTime. This indicates a failure to initiate motion after the start command, potentially due to a mechanical jam or drive issue, preventing operation.

• Press mechanism did not move after receiving a start command.
• Actuator or motor failed to engage.
• Insufficient power supply to the drive system.
• Mechanical obstruction preventing movement.
• Faulty start command signal or logic.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Check the mechanical system for obstructions, jams, or insufficient power/force to initiate movement.

2. 2

   Verify the motor, actuator, and associated power components for correct operation and wiring.

3. 3

   Inspect the position sensor to ensure it is detecting movement correctly and not stuck at a fixed value.

4. 4

   Review the PressStartedDelayTime parameter to ensure it is adequately set for the expected start-up sequence.