Automatic Motor Tuning Motor Too Small

Was bedeutet 53 ?

This fault occurs because the motor connected to the drive is likely too small for the Automatic Motor Tuning (AMT) calculations to be carried out accurately. When the motor is undersized, the drive may struggle to generate sufficient current or torque for reliable tuning, leading to an inability to properly characterize the motor.

• The motor's rated current (Parameter P3-02) is significantly below the drive's minimum threshold for accurate Automatic Motor Tuning (AMT).
• The motor's rated power (Parameter P3-01) is too low for the drive to generate sufficient current for parameter identification.
• The drive cannot accurately measure the motor's small impedance values due to limitations in its internal current sensing resolution.
• A mismatch between the drive's nominal power rating and the motor's nominal power, where the motor is undersized.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   1. Verify the motor's rated current (P3-02) against the drive's specified minimum motor current rating for AMT, usually found in the drive manual.

2. 2

   2. Confirm that the motor's rated power (P3-01) is within the recommended operating range for the drive's power rating.

3. 3

   3. If the motor is indeed too small, consider connecting a motor of appropriate size and power rating for the AMT procedure.

4. 4

   4. Consult the drive manufacturer's technical support or documentation for workarounds or alternative tuning methods for very small motors.

5. 5

   5. Manually enter critical motor parameters (e.g., P3-01 to P3-10) and verify them if AMT cannot be performed.