No brake line test was conducted %d

Was bedeutet 13649 F200 ?

The MC (Motion Control) unit did not conduct a motor brake line test, even though it is required according to parameter settings, or the test duration exceeded 10 seconds. This indicates a potential safety critical fault with the motor brake system.

• MC runs no test of the motor brake line although it is necessary according to parameter settings.
• The call for testing a brake line lasts longer than 10 seconds.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Verify the parameters related to motor brake testing are correctly configured, ensuring the test is enabled when necessary.

2. 2

   Check the motor brake wiring and connections for any damage, looseness, or incorrect installation, including the brake supply voltage.

3. 3

   Inspect the motor brake unit itself for proper mechanical function, signs of wear, or sticking.

4. 4

   Monitor the execution time of the brake line test; if it consistently exceeds 10 seconds, investigate potential delays in brake activation or release mechanisms.

5. 5

   Ensure the drive system is providing adequate voltage and current to reliably activate and release the brake.