System error safety technology

Was bedeutet E3106 ?

A general system error has occurred within the IndraDrive MPx02's integrated safety technology. This indicates a fundamental issue with the safety module's operation, its internal diagnostics, or its communication, leading to a critical safety shutdown and inability to operate safely.

• Internal hardware fault within the safety module of the IndraDrive MPx02.
• Critical software or firmware error in the safety processor, potentially due to corruption.
• Severe internal communication error between the safety module and the main drive controller.
• External electromagnetic interference affecting safety circuits or internal safety components.
• Parameter corruption affecting the safety system's core functionality.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Perform a full power cycle of the IndraDrive MPx02 to reset the safety module and check if the error clears.

2. 2

   Check for any specific diagnostic LEDs on the safety module itself that might indicate an internal fault code.

3. 3

   Verify that the drive's safety firmware is up-to-date and compatible with the overall system configuration.

4. 4

   Inspect all external safety-related wiring (e.g., STO, enable inputs) for damage, correct connections, and proper shielding to rule out external interference.

5. 5

   If the system error persists after these checks, it indicates an internal defect of the safety module. Contact Indramat safety service immediately.