Motor Phasing Reversed

Was bedeutet 16 ?

This error indicates that the motor phases are connected in a way that causes the motor to rotate in the opposite direction than commanded, or the drive detects an incorrect phase sequence. This is typically a wiring issue between the drive and the motor.

• Incorrect connection of the motor phase wires (U, V, W) to the drive output terminals.
• Drive parameter setting for motor rotation direction is incorrect or mismatched with the application.
• If an encoder is used, its direction feedback may not correctly correspond to the motor's actual rotation direction.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Verify the physical connection of the motor phase wires (U, V, W) to the drive output terminals against the wiring diagram.

2. 2

   If the motor is running in the opposite direction, swap any two output phases (e.g., U and V) at the drive's output terminals to reverse the rotation.

3. 3

   Check and adjust the drive parameter for motor rotation direction, if such a setting is available.

4. 4

   If an encoder is used, ensure its feedback direction is consistent with the motor's rotation (refer to Error 14 for encoder direction issues).