Übersetzen...
CheckMedia- Control

Check media control!

Kuka · LaserTech 3.1

Was bedeutet CheckMedia- Control ?

An error related to media control (e.g., process gas, cooling water, compressed air) has occurred. This issue needs to be resolved before the process can continue.

Häufige Ursachen

  • Missing or incorrect media supply to control system.
  • Control system failure due to improper media.
  • Incorrect media type detected by control.
  • Insufficient media flow rate.
  • Media contamination affecting control operation.

Reparaturschritte & Checkliste

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

  1. 1

    Identify and resolve the specific media error (e.g., verify gas pressure, check water flow, inspect media lines).

  2. 2

    Acknowledge the message on the robot controller HMI.

  3. 3

    Resume or restart the active program.

Alle Codes in diesem Handbuch durchsuchen (46)
Verifizierte technische Daten. Zuletzt aktualisiert: March 2026

Verwandte Fehlercodes

AcknWfdHeat- MessagePlease acknowledge errors on the wire heater unitCollectionErro- rOfLaserError of laser system ---> Resumption of process possible after dialog and forced reset of laserCompleteCold- RunComplete program will be continued without active process. Resumption with active process by executing LASER_INIT command
Quelle: Kuka LaserTech 3.1
Open Manual (Page 77)Mehr Codes in diesem Handbuch suchen