Serial Communication Error (Outdoor Unit Internal)

Was bedeutet Ed ?

A serial communication error has occurred either between the outdoor controller board and the outdoor power board, or between the outdoor controller board and the M-NET P.C. board. This critical internal error prevents components within the outdoor unit from communicating correctly, leading to system failure.

• Internal serial communication failure within the outdoor unit's control board.
• Faulty serial communication IC on the outdoor unit PCB.
• Corrupted firmware or data on the outdoor unit's processor.
• Loose internal ribbon cable connections within the outdoor unit.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Physically check if connector (CN4) between the outdoor controller board and outdoor power board is disconnected.

2. 2

   Inspect connectors (CNMNT and CNVMNT) on the outdoor controller board for poor connections.

3. 3

   Cycle power to the unit (turn off, then on again) to re-check for the error.