Mechanical Weakening Detection 2

Was bedeutet UL5 ?

The drive detected undertorque conditions consistent with mechanical weakening or fatigue, as defined by the settings in L6-08 [Mechanical Fatigue Detect Select]. This fault suggests potential degradation of critical machine components or a loss of load. If unaddressed, this could lead to unexpected mechanical failure, loss of production, or unsafe operating conditions.

• Progressive wear of mechanical bearings, gears, or other drive train components, reducing required torque.
• Gradual degradation of pump impellers or fan blades, leading to decreased load resistance.
• Loosening of critical mechanical fasteners over time, resulting in inefficient power transfer.
• Incorrect threshold or selection criteria set in L6-08 (Mechanical Fatigue Detect Select).
• Sensor drift or malfunction causing consistent underreporting of motor current feedback.

Klicken Sie auf Schritte, um Ihren Fortschritt zu verfolgen.

1. 1

   Perform a thorough mechanical inspection of the motor, gearbox, and driven load for wear, damage, or looseness.

2. 2

   Monitor motor current (U1-03) and corresponding mechanical output over several operational cycles to observe trends.

3. 3

   Adjust L6-08 (Mechanical Fatigue Detect Select) to a value sensitive to gradual changes but tolerant of normal operation.

4. 4

   Utilize predictive maintenance tools (e.g., vibration analysis) to identify mechanical degradation.

5. 5

   Verify the accuracy of the drive's internal current measurement against a calibrated external clamp meter.