GROUPERR_RANGE_OVERRIDETYPE

What does 42EB mean?

The 'Override Type' parameter configured for the group is outside its allowed range of [1, 2]. This parameter defines the operational behavior of override functions (e.g., speed override), and an invalid type will prevent proper scaling of motion commands, leading to unexpected speeds or unresponsive overrides.

• User error during manual configuration, setting the 'Override Type' parameter to a value other than 1 or 2.
• Programmatic assignment via PLC logic or an HMI attempting to set an unsupported 'Override Type' value.
• Loading an incompatible configuration file from another machine or an older software version.
• System memory issue causing a corrupted 'Override Type' parameter value to be loaded during startup.

Click steps to track your progress.

1. 1

   1. Access the NC group configuration via the engineering software (e.g., TwinCAT System Manager).

2. 2

   2. Locate the 'Override Type' parameter for the affected NC group.

3. 3

   3. Set the 'Override Type' parameter to either 1 (e.g., Linear Override) or 2 (e.g., Quadratic Override) as required by the application.

4. 4

   4. Confirm the parameter change and save the updated configuration to the controller.

5. 5

   5. Perform a warm restart of the NC task or controller to activate the corrected override type.