EL
ErrorLib
Brands
||
  1. Home
  2. Bosch Rexroth
  3. Motion Control
  4. 1290
About·Privacy·Terms

ErrorLib — Industrial Fault Code Library

Disclaimer: ErrorLib is an independent technical reference tool. While we aim for accuracy, always verify with the manufacturer’s official service manuals before performing maintenance on industrial equipment. ErrorLib is not affiliated with the brands listed.

1290

SERCOS state class 1: Motor overtemperature cut-off %s-axis.

Bosch Rexroth · Motion Control

What does 1290 mean?

A SERCOS state class 1 error indicating that the motor on the specified axis has exceeded its safe operating temperature, triggering a cut-off. The drive will attempt a controlled response with a torque release. This is classified as a servo loop or drive fault.

Common Causes

  • Servo loop fault
  • Drive fault
  • Motor overtemperature on the %s-axis.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Initiate a control reset in the active channel.

Browse all codes in this manual (60)
Verified technical data. Last updated: April 2026

Related Faults

1287Error during generating the stack for the IdleTask.1288SERCOS state class 1: Overload cut-off %s-axis.1289SERCOS state class 1: Amplifier overtemperature cut-off %s-axis.
Source: Bosch Rexroth Motion Control
Open Manual (Page 79)Search more codes in this manual