EL
ErrorLib
Brands
||
  1. Home
  2. Bosch Rexroth
  3. Motion Control
  4. 1295
About·Privacy·Terms

ErrorLib — Industrial Fault Code Library

Disclaimer: ErrorLib is an independent technical reference tool. While we aim for accuracy, always verify with the manufacturer’s official service manuals before performing maintenance on industrial equipment. ErrorLib is not affiliated with the brands listed.

1295

SERCOS state class 1: Overcurrent fault %s-axis.

Bosch Rexroth · Motion Control

What does 1295 mean?

This SERCOS state class 1 error reports an overcurrent condition on the specified axis. The drive attempts the best possible response with a subsequent torque release to protect the system. This fault is indicative of an issue in the servo loop or the drive's power stage.

Common Causes

  • Servo loop fault
  • Drive fault
  • Overcurrent condition on the %s-axis.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Initiate a control reset in the active channel.

Browse all codes in this manual (60)
Verified technical data. Last updated: April 2026

Related Faults

1287Error during generating the stack for the IdleTask.1288SERCOS state class 1: Overload cut-off %s-axis.1289SERCOS state class 1: Amplifier overtemperature cut-off %s-axis.
Source: Bosch Rexroth Motion Control
Open Manual (Page 79)Search more codes in this manual