EL
ErrorLib
Brands
||
  1. Home
  2. Bosch Rexroth
  3. Motion Control
  4. 1340
About·Privacy·Terms

ErrorLib — Industrial Fault Code Library

Disclaimer: ErrorLib is an independent technical reference tool. While we aim for accuracy, always verify with the manufacturer’s official service manuals before performing maintenance on industrial equipment. ErrorLib is not affiliated with the brands listed.

1340

Data error in %s (%s-axis).

Bosch Rexroth · Motion Control

What does 1340 mean?

The drive does not accept the identification number provided in the SCS-file for the specified axis. This is a servo loop or drive fault, indicating a mismatch between the configured identification number and what the drive expects or supports.

Common Causes

  • Drive does not accept the identification number from the SCS-file for the %s-axis.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Compare the identification number value specified in the SCS-file with the drive's minimum/maximum acceptable range.

Browse all codes in this manual (60)
Verified technical data. Last updated: April 2026

Related Faults

1287Error during generating the stack for the IdleTask.1288SERCOS state class 1: Overload cut-off %s-axis.1289SERCOS state class 1: Amplifier overtemperature cut-off %s-axis.
Source: Bosch Rexroth Motion Control
Open Manual (Page 82)Search more codes in this manual