EL
ErrorLib
Brands
||
  1. Home
  2. Bosch Rexroth
  3. Motion Control
  4. 840
About·Privacy·Terms

ErrorLib — Industrial Fault Code Library

Disclaimer: ErrorLib is an independent technical reference tool. While we aim for accuracy, always verify with the manufacturer’s official service manuals before performing maintenance on industrial equipment. ErrorLib is not affiliated with the brands listed.

840

Incorrect SERCOS phase selection (->%d).

Bosch Rexroth · Motion Control

What does 840 mean?

During SERCOS startup, an incorrect communication phase was selected. Only phases 0 to 4 are permissible, and they must be configured in ascending order, incrementing by one step. This is a servo loop or drive fault.

Common Causes

  • Incorrect SERCOS communication phase selected during startup.
  • SERCOS phases not set in ascending order or not in steps of one.

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Check the commanded SERCOS communication phase setting and adjust it if necessary.

Browse all codes in this manual (60)
Verified technical data. Last updated: April 2026

Related Faults

1287Error during generating the stack for the IdleTask.1288SERCOS state class 1: Overload cut-off %s-axis.1289SERCOS state class 1: Amplifier overtemperature cut-off %s-axis.
Source: Bosch Rexroth Motion Control
Open Manual (Page 61)Search more codes in this manual