Emergency-Stop activated

What does F6034 mean?

The external emergency stop circuit connected to the IndraDrive has been activated, commanding an immediate and controlled stop of the motor. This is a safety feature designed to bring the machine to a safe state in an emergency.

• Emergency stop button pressed.
• Fault in the emergency stop wiring (e.g., broken wire, short to ground).
• Associated safety device (e.g., light curtain, safety gate) triggered.
• Faulty emergency stop relay or safety module.

Click steps to track your progress.

1. 1

   Verify that no emergency stop buttons or safety devices (e.g., light curtains, safety gates, pull cords) are activated.

2. 2

   Inspect the emergency stop circuit wiring for any breaks, loose connections, or short circuits.

3. 3

   Reset the emergency stop circuit and the drive after confirming the cause of activation.

4. 4

   Check the status of any external safety relays or modules integrated into the emergency stop chain.

5. 5

   Review the emergency stop logic in the safety controller to ensure proper functionality.