Standstill monitoring: Laser was switched off because robot welded for too long at the same position

What does RobotStandStill mean?

The laser has been automatically deactivated because the robot remained stationary, welding at the same position for a duration exceeding the configured standstill monitoring time (LSR_Stop_InspectionTime).

• Standstill monitoring detected robot welding at the same position for too long.
• Robot movement has been stopped due to excessive dwell time.
• Robot position monitoring triggered a halt.
• Standstill timer exceeded for robot motion.
• To prevent overheating or damage, robot motion was halted.

Click steps to track your progress.

1. 1

   If prolonged welding at a fixed position is intentionally required, increase the value of the LSR_Stop_InspectionTime parameter in the configuration.