EL
ErrorLib
Brands
||
  1. Home
  2. SEW Eurodrive
  3. MOVIMOT MM..D With AC Motor DRS
  4. 08
About·Privacy·Terms

ErrorLib — Industrial Fault Code Library

Disclaimer: ErrorLib is an independent technical reference tool. While we aim for accuracy, always verify with the manufacturer’s official service manuals before performing maintenance on industrial equipment. ErrorLib is not affiliated with the brands listed.

08

Speed monitoring

SEW Eurodrive · MOVIMOT MM..D With AC Motor DRS

What does 08 mean?

The speed monitoring function has triggered, indicating that the load on the drive is too high for the current operating conditions. This error is typically active when DIP switch S2/4 is set to 'ON' or when additional function 13 is active.

Common Causes

  • Excessive load on the drive system exceeding the set speed limits

Repair Steps & Checklist

Click steps to track your progress.

  1. 1

    Reduce the load on the drive

  2. 2

    Reset the error by switching off the DC 24 V supply voltage

  3. 3

    Reset the error via the control system or dedicated reset function

Browse all codes in this manual (16)
Verified technical data. Last updated: April 2026

Related Faults

01Overcurrent in output stage06Phase failure07DC link voltage too high
Source: SEW Eurodrive MOVIMOT MM..D With AC Motor DRS
Open Manual (Page 151)Search more codes in this manual