Ground Fault

¿Qué significa F13 ?

This fault detects a current path from the motor or drive output wiring to ground. This can be caused by damaged motor insulation or faulty wiring between the drive and the motor.

• Insulation breakdown in the motor windings due to age, moisture ingress, overheating, or physical damage, creating a path to ground.
• Damaged motor cable insulation between the drive and the motor, creating a current path to ground (e.g., crushed conduit, abrasion).
• Moisture, conductive dust, or foreign material inside the motor terminal box or drive output terminals (U, V, W) causing a short to ground.
• Incorrect grounding of the motor frame or cable shielding, leading to an improper ground path.
• Internal drive output stage component failure leading to a ground fault within the drive itself (less common).

Haga clic en los pasos para seguir su progreso.

1. 1

   Disconnect the motor cables (U, V, W) from the drive output terminals. Perform an insulation resistance test (megger) on the motor cable from each phase conductor to ground.

2. 2

   Perform an insulation resistance test (megger) on the motor windings, checking each phase (U, V, W) to the motor frame (ground).

3. 3

   Inspect the entire length of the motor cable for visible damage, abrasion, or signs of moisture ingress.

4. 4

   Check the motor terminal box and drive output terminal area for moisture, conductive debris, or loose wire strands causing a short to ground.

5. 5

   Ensure proper grounding connections for the motor frame and cable shield (if used) are intact and have low resistance to the main ground bus.