PwrDn NVS Incomp

¿Qué significa 103 ?

This internal data error relates to an incompatibility or corruption in the power-down non-volatile storage data. It suggests an issue with how the drive saves and retrieves its state or parameters during power cycles. Without resolution, the drive's stability during power transitions and its ability to recover its operational state could be compromised.

• Firmware version mismatch between the main control board and the structure of existing power-down NVS data.
• Corruption of critical power-down data due to sudden power loss, brownout, or voltage sags.
• Internal NVS hardware fault affecting the specific memory sectors used for power-down data storage.
• Incomplete write operation of power-down data during a normal shutdown sequence.
• Electromagnetic interference (EMI) during NVS read/write cycles, leading to data corruption.

Haga clic en los pasos para seguir su progreso.

1. 1

   1. Perform a parameter reset to factory defaults via the HMI or programming software (e.g., P0-01 to "Factory Reset" command).

2. 2

   2. Re-commission the drive by re-entering all necessary motor, application, and control parameters.

3. 3

   3. Verify stable incoming 3-phase AC supply voltage (e.g., L1-L2-L3) and stable control voltage (e.g., 24VDC) during drive operation and shutdown.

4. 4

   4. Check for and install any available firmware updates for the main control board to ensure compatibility with NVS structures.

5. 5

   5. If the fault recurs, the main control board (MCB) hardware responsible for power-down data integrity may be faulty and requires replacement.