Parameter value is outside its limits (Specific range)

¿Qué significa 3072–5122 ?

A parameter has been configured with a value that falls outside its acceptable minimum or maximum range within a specific internal code range. This prevents the drive from operating correctly and can lead to unexpected behavior.

• Manual entry of a parameter value (e.g., P1-54 Motor rated current) exceeding the drive's maximum allowable limit.
• Loading an incorrect parameter set from a different drive model or power rating.
• Autotune or motor identification process attempting to set a physically impossible value for the connected motor.
• Corruption of the parameter value in non-volatile memory (EEPROM or Flash).
• Software calculation error internally generating an out-of-range value that violates defined limits.

Haga clic en los pasos para seguir su progreso.

1. 1

   Identify the specific parameter code displayed on the LCP associated with this fault.

2. 2

   Refer to the drive's operating manual to find the valid range (minimum/maximum) for the identified parameter.

3. 3

   Adjust the parameter value (e.g., P1-54 Motor rated current) to be within its acceptable limits.

4. 4

   If parameters were loaded from a file, verify the file matches the exact drive model and power rating.

5. 5

   Perform a factory reset via Parameter P14-22 (Reset options) set to 2 (Load LCP defaults) and re-enter critical parameters.