Digital Servo System is Abnormal
Fanuc · Series 20 CNC
¿Qué significa 417 ?
Similar to Alarm 414, this alarm indicates a general abnormality within the digital servo system of the Fanuc Series 20 CNC. It suggests an issue with the integrity of the digital control loop or communication, preventing reliable servo operation.
Causas comunes
- Internal fault within the digital servo amplifier.
- Communication error or data integrity issue between the CNC and the servo amplifier.
- Faulty servo control board in the CNC.
- Incorrect or corrupted critical servo parameters.
- Transient power fluctuations affecting the digital servo components.
Pasos de reparación & Lista de verificación
Haga clic en los pasos para seguir su progreso.
- 1
Check the status LEDs on the digital servo amplifier for any specific fault codes and consult the amplifier's manual for detailed diagnostics.
- 2
Power cycle the CNC and all servo amplifiers to reset the digital servo system.
- 3
Inspect the serial communication cables (e.g., fiber optic or twisted pair) between the CNC and servo amplifiers for damage or loose connections.
- 4
Verify critical servo parameters are correctly set and have not been corrupted.
- 5
Measure input voltages to the servo amplifier to ensure they are stable and within specification.