Internal fault (e.g. main board)

¿Qué significa 704 ?

The Fronius Primo GEN24 208-240 inverter has detected an internal fault, likely related to its main control board. This is a critical error indicating a severe hardware malfunction that prevents any normal operation of the inverter.

• Internal fault (e.g. main board).

Haga clic en los pasos para seguir su progreso.

1. 1

   Perform a complete power cycle of the Fronius Primo GEN24 208-240 inverter: disconnect both AC and DC power, wait a few minutes, then restore power (DC first, then AC).

2. 2

   Check the inverter's event log for any additional diagnostic messages or fault codes that could further pinpoint the issue.

3. 3

   Verify that the inverter's firmware is up to date, as some stability issues can be resolved via software.

4. 4

   If the inverter was recently installed or serviced, ensure all internal cables and connections are secure and undisturbed (only for qualified personnel).

5. 5

   As this error points to a core internal hardware problem, contact Fronius service immediately for advanced diagnostics and potential main board replacement.