Failure in Closing the Lock

¿Qué significa 06 ?

This error is recorded if the door fails to close properly within 15 seconds, despite the door-closing signal being continuously present. It triggers after eight continuous occurrences. It also occurs if the door-close limit signal disagrees with the door-lock position for 4 continuous seconds (excluding cases of missing door-lock signals), indicating an overtime condition in door closing.

• The door mechanism fails to complete the closing sequence within the 15-second time limit.
• Mechanical obstruction physically preventing the door from closing fully.
• Faulty door motor or an issue within the door control circuit.
• Disagreement between the door-close limit signal and the actual door-lock position for more than 4 seconds.

Haga clic en los pasos para seguir su progreso.

1. 1

   Observe the door closing operation for any physical obstructions in the door path or track.

2. 2

   Measure the voltage and current supplied to the door motor during the closing sequence.

3. 3

   Verify the status of the door-closing signal, car door lock signal, and landing door lock signals, ensuring they are active as expected.

4. 4

   Check the door-close limit switch for proper activation when the door is expected to be fully closed.

5. 5

   Inspect the door lock mechanism for proper engagement and secure locking.