Number of Sensors Verify Error

¿Qué significa 24780000 ?

The system detected a mismatch between the configured number of sensors and the actual number of sensors physically connected. This discrepancy prevents correct system operation based on expected sensor inputs.

• Configuration setting for sensor count does not match the physically connected sensors

Haga clic en los pasos para seguir su progreso.

1. 1

   Verify the configured number and type of sensors within the Omron NJ/NX-series controller's Sysmac Studio project against the actual physical installation and system design documentation.

2. 2

   Inspect all sensor wiring and connections for integrity, damage, and proper termination at the Omron I/O modules and the sensors themselves.

3. 3

   Verify the operational status of each individual sensor by observing sensor indicator LEDs and confirming corresponding input states in the controller's I/O monitor.

4. 4

   Measure the supply voltage at the terminals of each physically connected sensor to confirm adequate power delivery.

5. 5

   Check the diagnostic indicators (LEDs) on the relevant Omron I/NX-series I/O modules for any errors that could affect sensor input detection.