Temperature Sensor Malfunction

¿Qué significa PF Temp Err ?

This fault indicates a malfunction in one of the drive's internal temperature sensors. Without accurate temperature feedback, the VSD cannot properly protect itself from overheating, which is a critical safety mechanism. This can lead to unmonitored temperature increases and subsequent component failure or damage if the drive continues to operate.

• Open circuit or short circuit in the temperature sensor wiring or connection.
• Failed temperature sensor (e.g., NTC thermistor, PT100/1000) itself.
• Damaged Analogue-to-Digital Converter (ADC) input on the control board for the sensor.
• Loose connector for the temperature sensor on the control board.
• Electromagnetic interference affecting the low-voltage sensor signal.

Haga clic en los pasos para seguir su progreso.

1. 1

   Power down and disconnect drive. Locate the internal temperature sensor(s) (e.g., on heatsink or power board).

2. 2

   Measure resistance of the temperature sensor (e.g., NTC thermistor) at ambient temperature and compare to its datasheet value.

3. 3

   Inspect sensor wiring for cuts, pinches, or loose connections to the control board.

4. 4

   Reseat the temperature sensor connector on the control board.

5. 5

   Check for proper shielding of sensor wires if they run near power cables.