EEPROM checksum fault

¿Qué significa F22 ?

An error has occurred with the EEPROM checksum, indicating a parameter save fault, faulty operation during data storage, or a component failure within the EEPROM memory. This can lead to incorrect drive configuration.

• Corruption of stored parameters in the EEPROM due to power fluctuations or an abrupt power loss during a save operation.
• Internal EEPROM memory chip failure or degradation, preventing reliable data storage or retrieval.
• Firmware bug or software anomaly causing incorrect checksum calculation or data access issues.
• Electromagnetic interference (EMI) or transient voltage spikes affecting the EEPROM write/read process.
• Incorrect parameter loading or saving process initiated by user or external control system.

Haga clic en los pasos para seguir su progreso.

1. 1

   Attempt to re-initialize the drive to factory default settings (e.g., Parameter P14-22 'Initialization' to '1'). This may clear corrupted memory.

2. 2

   Cycle power to the drive (turn off, wait 30 seconds, turn on) to attempt a soft reset of the internal electronics.

3. 3

   Reload a known good parameter backup file from a PC or external memory card into the drive (e.g., using Drive Composer or a specific menu option).

4. 4

   If the fault persists after re-initialization and parameter loading, the EEPROM memory module or main control board may be faulty, requiring service or replacement.

5. 5

   Ensure stable power supply to the drive and surrounding equipment to rule out power quality issues affecting memory writes.