Counter fault

¿Qué significa F24 ?

The values displayed on the internal counters of the drive are incorrect or corrupted. This affects the accuracy of operational data logging.

• Corruption of internal memory regions used for counter storage, possibly due to power fluctuations or software errors.
• Internal component failure on the control board responsible for maintaining counter values.
• Firmware bug or software anomaly affecting the accuracy or persistence of counter data.
• Unexpected drive reset cycles or improper shutdown procedures interrupting counter updates.
• Electromagnetic interference (EMI) disrupting data integrity during counter updates.

Haga clic en los pasos para seguir su progreso.

1. 1

   Perform a power cycle of the drive (turn off, wait 30 seconds, turn on) to attempt to reset the internal counters.

2. 2

   Attempt to re-initialize the drive to factory default settings (e.g., Parameter P14-22 'Initialization' to '1'). Note: This will erase all parameters and historical counter data.

3. 3

   Update the drive's firmware to the latest version. This can resolve known software bugs related to counter management.

4. 4

   If specific counters are accessible (e.g., run time counter in Menu 1-13 'Run time kWh'), attempt to reset them via menu option if available.

5. 5

   If the fault persists and counter accuracy is critical, the control board may be faulty, requiring drive service or replacement.