Oversetter...
26

F-Block_ID Not Supported (V2 CPU)

ABB · PB610 Panel Builder 600 Programming Software

Hva betyr 26 ?

Parameter "F_Block_ID" is invalid or not supported in this configuration for an AC500 V2 non-safety CPU PM5xx. This indicates a mismatch in the identifier for the safety function block.

Vanlige årsaker

  • The specific F-Block_ID requested is not implemented or supported by the V2 CPU.
  • Attempting to use an unsupported safety function block.
  • Firmware incompatibility between the V2 CPU and the safety device.

Reparasjonssteg & Sjekkliste

Klikk på steg for å spore fremgangen.

  1. 1

    Check the safety PLC configuration for the "F_Block_ID" parameter.

Se alle koder i denne manualen (58)
Verifisert teknisk data. Sist oppdatert: March 2026

Relaterte feilkoder

1Safety Destination Address Not Valid (V2 CPU)10Parameter F_SIL Exceeds Specific Application SIL (V2 CPU)11Safety Watchdog Time Zero (V2 CPU)
Kilde: ABB PB610 Panel Builder 600 Programming Software
Open Manual (Page 434)Søk flere koder i denne manualen