Motor rated current undefined

Hva betyr 4067 ?

The motor rated current parameter is set to a value less than 0.2A, which is too low for the drive to effectively control the motor. This typically indicates incorrect motor data entry or an attempt to use a motor too small for the drive.

• Incorrect motor rated current entered in the drive parameters, specifically a value less than 0.2A.
• Attempting to control a motor that is physically too small for the capabilities of the drive.
• Missing or corrupted motor data in the drive's configuration.
• Typographical error during parameter entry, leading to an invalid low current value.

Klikk på steg for å spore fremgangen.

1. 1

   Check and correct the motor data parameters in the drive, ensuring the motor rated current matches the motor's nameplate FLA.

2. 2

   Verify that the motor being used is appropriately sized for the drive and the application.

3. 3

   If the motor's actual rated current is genuinely below 0.2A, consider if this drive is suitable for such a small motor.

4. 4

   Re-enter the motor parameters carefully to avoid any typographical errors.