Output Overload Condition

Hva betyr Overload ?

This diagnostic indicates an overload condition exists on the module, meaning the module's output current limit for a specific point has been exceeded. This can occur if the connected load draws more current than the module is rated to supply. The tag automatically resets to 0 when the condition is removed.

• Load current exceeds the maximum continuous current rating of the output point
• Connected load device is drawing excessive current due to an internal fault or malfunction
• Accumulated current from multiple loads exceeds the module's total output current capacity

Klikk på steg for å spore fremgangen.

1. 1

   Measure the actual current draw of the connected load during operation to ensure it is within the module's specified output current limits.

2. 2

   Check the load device for any faults that could cause it to draw excessive current.

3. 3

   Review the system design to ensure that the output module is appropriately sized for the connected loads, considering both continuous and surge currents.