Processor's Compatibility File Does Not Exist

Hva betyr 8000 ?

This fault implies that the necessary compatibility file for the processor is missing. This file contains crucial information for the processor to operate correctly and interact with its programming software or other devices, compromising its functionality.

• Missing or corrupted firmware compatibility file on the processor.
• Incorrect firmware update or installation.
• Using an incompatible version of programming software.

Klikk på steg for å spore fremgangen.

1. 1

   Verify stable communication link between the programming workstation and the PLC processor using the appropriate communication driver (e.g., Ethernet/IP, USB, Serial).

2. 2

   Check the installed firmware revision of the PLC processor against the firmware revision specified in the programming project file.

3. 3

   Inspect the programming software (e.g., Studio 5000 Logix Designer, RSLogix 500) for the correct installation of Add-On Profiles (AOPs) or Device Descriptions corresponding to the specific PLC processor model and firmware revision.

4. 4

   Verify that the RSLinx Classic or RSLinx Enterprise driver configuration correctly identifies the PLC processor model and revision.