PwrDn NVS Blank

Hva betyr 101 ?

This fault indicates an internal data error within the non-volatile storage (NVS), often occurring after a flash update attempting to correct a Fault 117. This suggests a corruption issue within the drive's internal memory. The drive's internal data is compromised, potentially leading to unstable operation or incorrect parameter handling if unresolved.

• Unsuccessful or interrupted firmware update process for the main control board, leaving NVS in an undefined state.
• Corruption of the non-volatile storage (NVS) during an unexpected power-down or control power interruption.
• Internal hardware defect within the NVS chip (e.g., flash memory) preventing proper initialization.
• Voltage fluctuations or noise spikes occurring during critical NVS write operations.
• Previous attempts to clear NVS (e.g., after Fault 117) were incomplete or failed.

Klikk på steg for å spore fremgangen.

1. 1

   1. Perform a factory reset of all drive parameters via the HMI or programming software (e.g., set P0-01 to "Factory Reset" and execute).

2. 2

   2. Re-attempt a full firmware re-flash of the main control board using the latest compatible firmware version and a stable connection (e.g., USB).

3. 3

   3. Verify the drive's control power supply (e.g., 24VDC) for stability and correct voltage levels at the MCB terminals.

4. 4

   4. If available, attempt to restore a saved non-volatile storage image or parameter backup using specialized service tools.

5. 5

   5. If the fault persists, replacement of the main control board (MCB) is indicated due to suspected NVS hardware corruption.