Adapter not available for module communication

Hva betyr F017 ?

The adapter is not available to communicate with the module. This prevents the module from sending or receiving data.

• The adapter is no available to communicate with the module

Klikk på steg for å spore fremgangen.

1. 1

   Verify that the module and its associated communication adapter are correctly seated in their respective slots or mounting positions.

2. 2

   Inspect all external communication cables connecting the adapter to the module or network for damage, proper termination, and secure connections.

3. 3

   Measure the supply voltage at the module and adapter power input terminals and compare against specified nominal values.

4. 4

   Verify the module and adapter configuration within the Logix 5000 project (e.g., module type, slot, IP address, communication parameters) against the physical setup.

5. 5

   Observe the status LEDs on both the module and adapter for any fault or communication error indications as per manufacturer's documentation.