K-bus Initialization Error

Hva betyr 6 pulses (arg 0) ?

The K-bus ERR LED flashes 6 times, with '0' in the argument sequence, indicating a general error during the initialization process of the K-bus. This suggests an internal issue with the Embedded PC responsible for K-bus communication.

• K-bus initialization sequence failed.
• Bus terminals not detected or responding during startup.
• Incorrect K-bus configuration preventing initialization.
• Hardware fault in the K-bus controller.

Klikk på steg for å spore fremgangen.

1. 1

   Replace the Embedded PC, as the error points to a fault in its K-bus initialization hardware or firmware.