GROUPERR_RANGE_TIMEUNITFIFO

Hva betyr 42EA ?

The 'Time Unit FIFO' parameter configured for the group is outside its allowed range of 0.0 ... 1000.0] seconds. This parameter likely relates to the timing and processing of buffered commands within the group's FIFO, and an incorrect value can disrupt sequential command execution or cause timing errors.

• Manual input error during configuration, setting the 'Time Unit FIFO' parameter outside the range [0.0 ... 1000.0] seconds.
• A PLC program or automated configuration routine attempted to assign an invalid 'Time Unit FIFO' value (e.g., negative or excessively high).
• Configuration file corruption or an incorrect restoration from backup, causing an out-of-range value for 'Time Unit FIFO'.
• Version incompatibility between the engineering software and the runtime, leading to misinterpretation of the 'Time Unit FIFO' parameter limits.

Klikk på steg for å spore fremgangen.

1. 1

   1. Open the NC group configuration in the development environment (e.g., TwinCAT XAE).

2. 2

   2. Navigate to the 'Time Unit FIFO' parameter for the specific NC group.

3. 3

   3. Enter a valid value for 'Time Unit FIFO' within the range of [0.0 ... 1000.0] seconds.

4. 4

   4. Compile and download the updated configuration to the industrial PC (IPC) controller.

5. 5

   5. Cycle power on the IPC controller or execute an NC reset command to ensure the new parameter is active.