Following error filter time (position) not allowed

Hva betyr 4507 ?

The value configured for the following error filter time (position) is not allowed, as it must be within the range [0.0, 600.0] seconds. This parameter filters out high-frequency noise from the following error signal, preventing nuisance trips. An invalid filter time can lead to either excessive false alarms or a failure to detect real errors.

• Parameter Px-03 (position following error filter time) is set to a value outside the allowed range of [0.0, 600.0] seconds.
• An automatic tuning routine or external PLC command has attempted to write an out-of-bounds value to the filter time parameter.
• Drive firmware incompatibility with an imported parameter file containing an invalid filter time value.
• User configuration error by manually entering a value greater than 600.0 seconds for the filter time.

Klikk på steg for å spore fremgangen.

1. 1

   Connect to the drive using the manufacturer's software and navigate to the parameter settings for position control.

2. 2

   Locate the parameter for position following error filter time (e.g., P5-03) and read its currently configured value.

3. 3

   Set the position following error filter time parameter (e.g., P5-03) to a value between 0.0 and 600.0 seconds (e.g., 0.05 seconds for minimal filtering).

4. 4

   Store the modified parameter settings in the drive's non-volatile memory and cycle power to the drive.

5. 5

   Check the PLC program for any commands that write to P5-03 and ensure they provide values within the acceptable range.