Error when unlocking the safety door

Hva betyr F3145 ?

This non-fatal safety error indicates a problem encountered during the process of unlocking a safety door or gate, as monitored by the IndraDrive MPx02. This could mean the unlock command was not executed, the feedback was incorrect, or a timeout occurred, preventing safe access.

• Mechanical fault or binding in the safety door lock mechanism.
• Electrical fault in the safety door lock actuator (e.g., solenoid, motor).
• Incorrect feedback from the safety door lock status switch.
• Wiring issue between the IndraDrive MPx02 and the safety door lock.
• Incorrect parameterization of the safety door unlocking sequence or timing.

Klikk på steg for å spore fremgangen.

1. 1

   Inspect the safety door lock mechanism for any mechanical obstructions, damage, or binding that prevents it from unlocking smoothly.

2. 2

   Verify the electrical operation of the door lock actuator, checking its power supply and control signals (e.g., 24VDC to unlock).

3. 3

   Check the feedback signal from the safety door lock status switch to ensure it accurately reflects the lock's state (locked/unlocked).

4. 4

   Inspect all wiring connecting the IndraDrive MPx02 to the safety door lock and its sensors for damage or loose connections.

5. 5

   Review safety parameters in the IndraDrive MPx02 related to safety door unlocking sequence and associated timers.