Oversetter...
1332

The PLC program was set in STOP state by the operator.

Bosch Rexroth · Motion Control

Hva betyr 1332 ?

The PLC program has been intentionally set into the STOP state by an operator using the programming device. This is a PLC error, requiring manual intervention to resume operation.

Vanlige årsaker

  • Operator manually set the PLC program to STOP using the programming device.

Reparasjonssteg & Sjekkliste

Klikk på steg for å spore fremgangen.

  1. 1

    Switch the PLC program to 'RUN' state using the programming device monitor.

Se alle koder i denne manualen (60)
Verifisert teknisk data. Sist oppdatert: March 2026

Relaterte feilkoder

1287Error during generating the stack for the IdleTask.1288SERCOS state class 1: Overload cut-off %s-axis.1289SERCOS state class 1: Amplifier overtemperature cut-off %s-axis.
Kilde: Bosch Rexroth Motion Control
Open Manual (Page 82)Søk flere koder i denne manualen