Over-heat of Control Module (ECM)

Hva betyr 9 ?

The Control Module of the ECM has detected an abnormal temperature, indicating overheating. This can be caused by poor ventilation, excessive load, or a fault in the module itself.

• The internal temperature of the control module exceeds its safe operating limit.
• Inadequate cooling or ventilation of the control module enclosure.
• Overload condition causing the module to generate excessive heat.
• Fan failure within the control module or enclosure.
• Ambient temperature is too high for the system's design.

Klikk på steg for å spore fremgangen.

1. 1

   Verify the cooling fan of the Control Module is operating correctly and not obstructed.

2. 2

   Check the ambient temperature inside the cabinet where the ECM is installed.

3. 3

   Inspect the heat sink of the Control Module for dust accumulation or blockages.