EXCESS ERROR (STOP)

Hva betyr SV0410 ?

This servo alarm is generated if the positioning deviation for an axis exceeds the limit set in parameter 1829 while the axis is in a stopped state. When this occurs, operation is immediately stopped, similar to an emergency stop. This indicates that the axis cannot maintain its commanded position while at rest within acceptable tolerances.

• The stopped axis has deviated from its commanded stationary position.
• Holding brake has failed, allowing drift.
• External force has moved the axis while it should be stationary.
• Position deviation exceeds tolerance while stopped.

Klikk på steg for å spore fremgangen.

1. 1

   Verify the value set in parameter 1829 (Positioning deviation limit for each axis in the stopped state) for the affected axis.