Timeout in U1 Phase

Hva betyr 32 ?

The battery charger experienced a timeout during the U1 (initial constant voltage) charging phase. This suggests the battery could not absorb current as expected or reach a stable state within the defined time, potentially indicating a battery health issue or charger malfunction.

• The battery is not absorbing current at the expected rate in the U1 phase, indicating potential degradation or internal resistance issues.
• Incorrect charger settings for the U1 phase timeout value, which may be set too short for the battery's condition.
• A faulty voltage measurement or regulation circuit within the charger, leading to incorrect detection of the U1 phase end condition.

Klikk på steg for å spore fremgangen.

1. 1

   Verify the charger's output voltage and current measurement accuracy during the U1 phase.

2. 2

   Check the charger's configuration for the U1 phase timeout setting (parameter, if available) and ensure it is suitable for the battery type and condition.

3. 3

   Assess the battery's overall condition, as it may not be accepting charge properly due to age or damage.