Fan fault
Fronius · Primo GEN24
Hva betyr 601 ?
The Fronius Primo GEN24 208-240 inverter has detected a fault with its internal cooling fan. This can lead to insufficient cooling and subsequent overheating if not addressed, potentially reducing performance or causing shutdown.
Vanlige årsaker
- Fan fault.
- Blocked fan.
- Dirty fan.
Reparasjonssteg & Sjekkliste
Klikk på steg for å spore fremgangen.
- 1
Power down the Fronius Primo GEN24 208-240 inverter using both AC and DC disconnects, then allow it to cool down completely.
- 2
Carefully inspect the fan vents and fan blades for any obstructions (dust, debris, insects) and clean them if necessary.
- 3
Check if the fan spins freely by gently trying to move it (with power off and safely discharged).
- 4
Ensure the inverter's installation location provides adequate ventilation and is not exposed to direct sunlight or confined spaces that could impede airflow.
- 5
If the fan remains faulty after cleaning and inspection, contact Fronius service for potential fan replacement, as this indicates an internal component failure.