Controller unit not suited for FS

Hva betyr 231-A005 ?

This warning indicates that the control unit (CC, UEC, UMC) is not suitable for control systems requiring functional safety (FS), as detected during a check of the safety kernel software SKERN-CC. The currently installed controller unit fulfills safety requirements according to EN 13849 but is not approved for functional safety applications.

• The installed controller unit (CC, UEC, UMC) is not approved for functional safety applications.
• Incorrect controller unit type or version installed for an application requiring functional safety (FS).
• Mismatched hardware configuration with the safety kernel software (SKERN-CC) requirements.

Klikk på steg for å spore fremgangen.

1. 1

   Verify the part number and type of the installed controller unit (CC, UEC, UMC) against the machine's functional safety requirements.

2. 2

   Replace the affected controller unit (CC, UEC, UMC) with a model explicitly approved for functional safety (FS).

3. 3

   Consult the machine documentation or Heidenhain technical support to confirm the correct controller unit required for your system's safety integrity level.