SKERN-CC%2: Communications error during dynamic sampling of X%4

Hva betyr 231-A086 ?

This error indicates that the dynamic sampling of the EnDat22 encoder (X%4) could not be performed within the prescribed time limit. This is a communication timeout issue, suggesting problems with the encoder, its wiring, or the controller's ability to communicate with it.

• The dynamic sampling of the EnDat22 encoder (X%4) could not be performed within the prescribed time.
• Faulty EnDat22 encoder or damaged encoder cable.
• Timing issues or heavy load on the controller preventing timely communication.
• Electrical interference affecting the EnDat communication.
• Incorrectly configured encoder parameters or communication settings.

Klikk på steg for å spore fremgangen.

1. 1

   Inspect the EnDat22 encoder cable (X%4) for any physical damage, proper shielding, and secure connections.

2. 2

   Verify the integrity and power supply to the EnDat22 encoder itself.

3. 3

   Check the controller's diagnostic logs for other concurrent errors that might indicate an overloaded system or internal communication issues.

4. 4

   Ensure all communication parameters for the EnDat22 encoder are correctly configured according to the manual.

5. 5

   Test the encoder and its cable separately if possible, or swap components with a known good one if available.