Safety parameters validation error

Hva betyr E3104 ?

The IndraDrive MPx02's integrated safety technology has detected an inconsistency or error during the validation of safety-related parameters. This indicates a potential breach or misconfiguration in the safety system, preventing safe operation and requiring immediate attention.

• Incorrect configuration of safety parameters (e.g., safety limits, operating modes) in the safety configuration tool.
• Parameter corruption during download, saving, or power cycling.
• Firmware mismatch between the safety control and standard control sections of the drive.
• Internal diagnostics detecting a safety-critical anomaly or data inconsistency.
• Attempt to load an incompatible safety configuration file.

Klikk på steg for å spore fremgangen.

1. 1

   Access the safety configuration tool for the IndraDrive MPx02 and perform a re-validation of all safety-related parameters.

2. 2

   Verify that all safety parameters have been correctly configured and match the requirements of the machine's safety concept and risk assessment.

3. 3

   If parameters were recently changed, revert to a previously validated safe configuration and re-test.

4. 4

   Ensure that the firmware of the drive's safety section is compatible with the standard firmware version and the safety configuration tool.

5. 5

   If validation continues to fail, it may indicate an internal hardware fault in the safety module. Contact Indramat safety service.