Safety related limited increment exceeded

Hva betyr F7010 ?

This safety fault indicates that a safety-related monitored increment of position has been exceeded. This is part of safe motion monitoring functions (e.g., Safe Incremental Position) which ensure that the axis does not move more than a defined distance within a specific timeframe or under certain conditions.

• Unexpected or uncontrolled motion of the axis.
• Incorrectly configured safety-related increment limit parameters (e.g., S-0-0XXX Safe Incremental Position Limit).
• Faulty position feedback (encoder) providing incorrect actual position values.
• Mechanical looseness or backlash leading to unintended motion.

Klikk på steg for å spore fremgangen.

1. 1

   Verify the configured safety-related increment limit parameters in the IndraDrive against the safety requirements of the machine.

2. 2

   Check for any mechanical issues (e.g., play, backlash, loose couplings) that could cause uncontrolled motion.

3. 3

   Inspect the position encoder for proper operation, secure mounting, and reliable signal output.

4. 4

   Review the control logic and commands to ensure that no unintended motion commands are being issued.

5. 5

   Recalibrate the position feedback system if necessary.