RS Block Data Error

Hva betyr RS 03 ?

This serial communication error indicates that the format of the program command data transmitted to the CLM01.3-M was incorrect. This is a general error related to the structure or content within a program block, rather than just the overall message length or termination.

• Incorrect data format within the fields of the transmitted program command block.
• Missing or extra characters, or incorrect data types, within the program data.
• Corrupted data during serial transmission, leading to an apparent data format error.
• Sending device software generating malformed program block data.

Klikk på steg for å spore fremgangen.

1. 1

   Verify that the program command format is transmitted correctly to the CLM01.3-M. Refer to Chapter 7 (Serial Interface) for the correct program command format.

2. 2

   Cross-check the transmitted program block data against the expected format and content for the specific command.

3. 3

   Check the serial communication line for any noise or interference that could cause data corruption.

4. 4

   Re-transmit the program command after thoroughly verifying the data format within the block.

5. 5

   Ensure the software generating the program data adheres strictly to the CLM01.3-M's protocol for program blocks.