Under voltage

Hva betyr 123 ?

The internal servo output stage is not ready due to an undervoltage condition. This will cause maximum braking and inhibit all active commands.

• Supply voltage dropped below the minimum threshold (e.g., P1-01).
• Power supply unit failure.
• Loose electrical connection on the power input terminals.
• Overload condition drawing excessive current, causing voltage sag.

Klikk på steg for å spore fremgangen.

1. 1

   Rectify the undervoltage fault condition.

2. 2

   Reset the fault by pressing the hardware acknowledgement button 'ACK' on the DSE I module.