Send Failure (General)

Hva betyr F113 ?

A general send failure has occurred, and retrying the transmission did not resolve the issue. This indicates a persistent underlying problem in the communication path or station configuration.

• Faulty network cables or incorrect wirings
• Faulty network hardware
• Electrical noise
• Absence of terminating resistors (in bus networks)
• Duplicate station numbers or duplicate control/remote master stations
• Parameter errors or incorrect switch settings on the corresponding station

Klikk på steg for å spore fremgangen.

1. 1

   Inspect network cables for damage, incorrect wiring, or loose connections

2. 2

   Verify the presence and correct installation of terminating resistors, if applicable (bus networks)

3. 3

   Check for sources of electrical noise

4. 4

   Confirm all station numbers are unique and control/remote master station settings are not duplicated

5. 5

   Review network parameters and switch settings to ensure the corresponding station is properly configured

6. 6

   Check for faulty network hardware